高h湿1v1公主侍卫_被蹂躏的女教师在线播放_男生和女生搞鸡鸡_特黄aaaaaaaaa及毛片

PETG has lots of advantage with excellent mechanical properties, well wear-resisting, good corrosion resistance, great weather resistance, non-degradable and high transmittance.Being called as the plexiglass in 3D printer filament,PETG filament has high transmittance which can be as high as 90% and its surface is extremely delicate with super visual effect.PETG possess extremely high toughness and excellent tensile properties, and its maximum tensile ratio can reach 180%. The PETG 3D printer filament is extensively used in automotive, cosmetics, household products and other fields.


Flythinking PETG 3D printer filament:
(1) Raw materials: imported from the best American material.
(2) Excellent wear-resisting great weather resistance and high transmittance
(3) Good corrosion resistance,well mechanical properties
(4) Low shrinkage, good round shape
(5) Accurate diameter (±0.02mm)
(6) No bubble
(7) Stable melting point
(8) No block the nozzle,print out smoothly
(9) To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc




PETG 3D printer filament color:Blue , White ,Black , Red

---

1.Produce process

I . Before produce extruding filament ,we will dry the 3D printer filament for a enough time (3-5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg

IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

2.Productiong quality control

        I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

       II.keep each record filament samples sent to customers, build a tracking able document.

       III.when the filament put on shelf longer than half a year, we will dry the filament again.

3.About waste & recycle

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.

4.packaging

       We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box

       We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

5.research and developing

       we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

       We have colors:

       Natural,white,black,red,blue,orange,purple,green,yellow,grey,brown,silever,gold,pink,transparent blue,transparent red,transparent yellow,transparent green,transparent orange,transparent,sky blue, dark blue ,florescent green,violet,skin,lime,dusk,kiwi,glow in dark (green),glow in dark(yellow),glow in dark(blue)etc